Subscribe

RSS Feed (xml)




Powered by Blogger

Your Ad Here

Speed up your ports

Author: HITENDRA TIWARI

Follow the instructions below to maximize the speed of your ports using the port settings:



  1. Go to Start

  2. Then Settings

  3. Select Control Panel

  4. Choose the System icon.

  5. Select the Device Manager tab and choose Ports.

  6. Right-click the Modem's Port and make sure that the following settings exist

Note: It may not be a bad idea to write down the current settings so if there are any problems, you can change the settings back to there original positions.

  1. Click Port Settings and make sure that the Bits Per Second is as high as possible.

  2. Make sure Flow Control is set for Hardware.

  3. Click Advanced and make sure the FIFO buffer is checked.

Make sure the Receive and Transmit buffers are as high as possible.

 

1 Response to “Speed up your ports”

  1. Unknown

    you have sujested 4 steps to reach the system while with my limited knowledge I think the same can be reached in 1 step - just by right clicking MyComputer and selecting properties.

    The remaining should be considered as standard procedure rather than trick.


Leave a Reply

Your Ad Here